Select "Settings > Lighting Settings" from the menu bar. The Inspector will display parameters for adjusting the lighting.
In the project, there are eight slots available for different lighting presets. Choose a preset by clicking on it. You can customize the selected preset with the following settings.
There are five spotlights available for shaping the light in your studio. The lights are positioned on the ceiling of the virtual studio. Select one of the lights to edit its settings.
With these parameters, you can adjust the light properties of the selected spotlight.
Brightness: The brightness of the light.
Saturation: The color saturation of the light.
Color: The color of the light.
Range: The illumination range of the light.
With these parameters, you can adjust the properties of the spotlight.
Angle: The beam angle of the spotlight.
Turn Horizontal: Rotate the spotlight horizontally, either to the left or right. In the 0° position, the spotlight is aligned to the center.
Tilt Vertical: Tilt the spotlight vertically, either downwards or upwards. In the 0° position, the spotlight is directed vertically downward. If the spotlight is intended to illuminate the back wall, a tilt of approximately 75° should be set.
Cast Shadows: Determine whether all lights should cast shadows.
Show Light Rig: Determine whether the spotlights on the studio ceiling should be visible.