Select "Settings > Studio Settings" from the menu bar. The Inspector will display the parameters for adjusting the studio.
With the Floor settings, you can adjust the floor.
Material: Here, you can choose between different materials.
Reflectivity: Adjusts how much the floor reflects.
Smoothness: Determines how smooth or rough the surface is.
Surface Relief: Some materials have irregularities that you can adjust in strength.
Color: You can tint the material with any color.
Saturation: Adjusts the color saturation of the tint.
Brightness: Allows you to set the overall brightness of the material.
With the Counter settings, you can customize the counter.
Use Counter: Switch the counter on or off.
Counter Type: There are different models of counters available, which you can choose from here.
Height: Adjusts the height of the counter.
Top Material: Choose the material for the surface of the counter.
Reflectivity: Adjusts how much the surface reflects the environment.
Body Material: Choose the material for the front of the counter.
Accent Color: Set any color for the trim.
Saturation: Adjusts the color saturation of the trim.
Self Illumination: Adjusts the brightness of the self-illumination of the trim.
You can display a logo on the front of the counter. With the Counter Logo settings, you can customize the logo display.
Image: Turn the logo display on or off, open the file browser to load an image file. You can load JPG or PNG files. PNG files with transparency will be displayed transparently.
Width: Set the width of your logo in centimeters.
Height: Set the height of your logo in centimeters.
Horizontal Position: You can move your logo to the right or left.
Vertical Position: You can move your logo up or down.
The background of the studio can be filled with an image file. The image file should have an aspect ratio of 6:1 (for example, 6000 × 1000 pixels).
Image: Turn the image display on or off, open the file browser to load an image file. You can load JPG or PNG files. PNG files with transparency will not be displayed transparently.
Self Illumination: Adjust the brightness of the background's self-illumination.
Optionally, you can use an additional image surface to adjust the background behind the actor in the virtual studio.
Image: Turn on or off the additional background image, open the file browser to load an image file. You can load JPG or PNG files. PNG files with transparency will be displayed transparently.
Bend: You can bend the image surface backward or forward.
Self Illumination: Adjust the brightness of the self-illumination of the image surface.
Width: Set the width of the image surface in meters.
Height: Set the height of the image surface in meters.
Depth Position: Move the image surface backward or forward.
Vertical Position: Move the image surface up or down.